7
Mar

A Simple Plan: Products

Rivet – The Fastener That Never Runs Old

Rivet is an old form of fastener which is still used today. Rivet has been present during the world war 1 and 2 which is used to construct boats and airplanes. Yet, you can still find rivet in the market today.

In the past, building ship and other iron structures like bridges require the use of hot rivets. Joining two pieces of either iron or steel using rivet is done once the rivet is heated that it turns into red hot. To blind the rivet over the hole, one person hits the other end while the other holds it using metal tongues. As the rivet cools down, it will start to contract that pulls the two pieces tighter together.

But the hammering and heat required in the process, this is considered to be very dangerous. Much more complicated it is when getting the hot rivets. A very popular example is the building a skyscraper in 1920’s. You couldn’t imagine how hard it is to to get hot rivets on a very high level.

But, things will always change which explains why the usual hot rivets are already replaced with cold rivets that is smaller. This is due to the fact that ships welded the steel hulls together for faster and stronger construction. Instead of using rivets, fasteners are now being used to bolt bridges together.

One of the good things with cold rivets is that they can be used at any project at home without professional skills on how use it. There are pop riveting kits available in DIY stores. Through the hole, the pop rivets are put attaching the gun and a moderate pressure allows the rivets to tighten itself. Since there are usually excess parts of the rivet, it can be crop off with the help of the riveting gun.

The aircraft industry has so much respect for rivets that they are still using them until this modern days. Rivets serve as a fastener to better hold two or more pieces together.

There is no other timeless fastener than the old rivets.

For different times, rivets tools have been a good choice when it comes to fixing and holding things together. This made fastening things possible even where welding is not applicable. For example, you need to join plywood and metal sheets, rivets can sure work good for this. These fasteners are a good choice especially with the materials that are susceptible to deformation. Depending on where to use it, there are several sizes to choose from.

Rivets are known for its different level of strength which made most industries to prefer to use it for different purposes. Due to this high demand, there are already several manufacturers from the different parts of the world. These fasteners are designed to be more strong, accessible and cost-effective.

Source: next